產品展示

◆ FC-SE150A塑性加工油適用于鋼板、不銹鋼板的重度擠壓、拉伸、沖壓工藝。產品含有較多的氯系極壓劑，潤滑性良好，較低的粘度，可適用于變形率大的加工。SE150A是SE150的性能提高品。
FC-SE150A plastic processing oil is applicable to severe squeeze and tensile stamping process of steel plate and stainless steel plate. This product contains more chlorine extreme pressure agent, good lubricity, low viscosity, and can be applied to the large deformation rate processing. SE150A is an improved product of SE150.
◆ FC-SE150塑性加工油適用于鋼板、不銹鋼板的重度擠壓、拉深、沖壓工藝。產品含有較多的氯系極壓劑，潤滑性良好，較低的粘度，可適用于變形率大的加工。
FC-SE150 plastic processing oil is applicable to severe squeeze and tensile stamping process of steel plate and stainless steel plate. This product contains more chlorine extreme pressure agent, good lubricity, low viscosity, and can be applied to the large deformation rate processing.
◆ FC-SM150塑性加工油適用于鋼板的中度擠壓、拉深、沖壓工藝。產品具有優良的潤滑性，粘度低，適用性很強。
FC-SM150 plastic processing oil is applicable to moderate squeeze and tensile stamping process of steel plate. It has good lubricity, low viscosity and strong applicability.
◆ FC-SD2000D是含有氯系添加劑的塑性加工油，適用于碳素鋼和不銹鋼沖孔、拉伸加工工藝，SD2000D是SD2000的低粘度品。
FC-SD2000D is plastic processing oil containing chlorine additives, applicable to punching and stretching process of carbon steel and stainless steel, SD2000D is low viscosity product of SD2000.
◆ FC-SD3000塑性加工油適用于碳素鋼、不銹鋼的重度沖壓、拉伸工藝。該產品具有優異的潤滑性，適用性很強。
FC-SD3000 plastic processing oil is applicable to heavy stamping and stretching process of carbon steel and stainless steel. This product has good lubricity and strong applicability.
◆ FC-SE200塑性加工油含有磷、硫、氯系極壓劑，適用于鋼板、不銹鋼板尤其是軸承鋼材的重度沖壓、沖孔工藝。
FC-SE200 plastic processing oil contains phosphorus, sulfur, chlorine extreme pressure agent, suitable for heavy stamping and punching process of steel plate and stainless steel plate, especially bearing steel.
◆ FC-FJ200塑性加工油適用于銅合金的沖壓加工，產品具有優良的潤滑性和良好的速干性。低粘度、高閃點、低氣味，作業性優良。
FC-FJ200 plastic processing oil is applicable to stamping processing of copper alloy, it has good lubricity and good quick-drying. It has low viscosity, high flash point, low odor and excellent workability.
◆ FC-SD1720適用于碳素鋼、不銹鋼的深絞孔、沖孔等重加工工藝。該產品含有較多的油脂、極壓劑及特種潤滑劑，無不愉快氣味，易被操作工接受。
FC-SD1720 is suitable for deep reaming, punching and other heavy processing of carbon steel and stainless steel. The product contains more grease, extreme pressure agents and specialty lubricants, has not unpleasant odor and easy to be accepted by operators.
◆ FC-SD3000H塑性加工油適用于碳素鋼、不銹鋼的重度沖壓、拉深工藝。該產品具有優良的潤滑性，適用性很強。
FC-SD3000H plastic processing oil is applicable to heavy stamping and stretching process of carbon steel and stainless steel. This product has good lubricity and strong applicability.
◆ FC-FJ2H塑性加工油適用于薄鋼板、薄不銹鋼板、磷青銅板的沖壓、沖孔、輕度拉深工藝。產品具有速干性和良好的潤滑性等特點。
FC-FJ2H plastic processing oil is suitable for stamping, punching and mild drawing process of thin steel sheet and thin stainless steel plate and phosphor bronze plate. It has quick-drying and good lubricity and other features.
◆ FC-FJ6塑性加工油適用于薄鋼板、薄銅合金板、薄鋁合金板的沖壓、沖孔、撓曲、輕度拉深工藝。產品具有速干性，不易揮發成分少，不用清洗等特點。
FC-FJ6 plastic processing oil is suitable for stamping, punching, bending and mild drawing process of thin steel sheet and thin copper alloy sheet and thin aluminum alloy plate. It has quick-drying, the less volatile components, without cleaning, etc.
◆ FC-FJ7M塑性加工油適用于薄鋼板、薄不銹鋼板的沖壓、沖孔、撓曲、輕度拉深工藝。產品具有速干性，不易揮發成分少等特點。
FC-FJ7M plastic processing oil is suitable for stamping, punching, bending and mild drawing process of thin steel sheet and thin stainless steel plate. It has quick-drying and the less volatile components, etc.
◆ FC-FJ15Q塑性加工油適用于薄鋼板的沖壓、沖孔、擠壓、輕度拉深工藝。產品具有優良的干燥性，良好的潤滑性等特點。
FC-FJ15Q plastic processing oil is suitable for stamping, punching, extrusion and mild drawing process of thin steel plate. It has excellent drying properties and good lubricity, etc.
◆ FC-FJ10塑性加工油適用于薄鋼板、薄不銹鋼板的沖壓、沖孔、撓曲、輕度拉深工藝。產品具有速干性，不易揮發成分少等特點。
FC-FJ10 plastic processing oil is suitable for plastic processing oil is suitable for stamping, punching, bending and mild drawing process of thin steel sheet and thin stainless steel plate. It has quick-drying and the less volatile components, etc.
◆ FC-SF6020K適用于碳素鋼、低合金鋼的沖壓、沖孔、拉伸工藝，也可用于螺釘、螺帽等的冷壓鍛造。該產品不含有氯系極壓劑，無不愉快氣味，易被操作工接受。
FC-SF6020K is applicable to stamping, punching and drawing process of the carbon steel and low alloy steel, can also be used for screws, nuts and other cold forging. This product does not contain chlorine extreme pressure agent, has not unpleasant odor and easy to be accepted by operators.
◆ FC-SF6000適用于合金鋼、不銹鋼的冷鍛、沖壓工藝，也可用于螺釘、螺帽等的冷壓鍛造。該產品不含有氯系極壓劑，無不愉快氣味，易被操作工接受。
FC-SF6000 is applied to cold forging and stamping process of alloy steel and stainless steel, can also be used for screws, nuts and other cold forging. This product does not contain chlorine extreme pressure agent, has not unpleasant odor and easy to be accepted by operators.
◆ FC-SM220塑性加工油適用于鋼、鋁材的拉深、沖壓、彎曲工藝。產品含有硫系極壓劑，具有優良的潤滑性，粘度低，適用性強。
FC-SM220 plastic processing oil is suitable for drawing, stamping and bending process of steel and aluminum. It contains sulfur extreme pressure agent, has excellent lubricity, low viscosity and strong applicability.
◆ FC-FJ8塑性加工油適用于薄鋼板、薄銅合金板、薄鋁合金板的沖壓、沖孔、撓曲、輕度拉深工藝。產品具有速干性，不易揮發成分非常少，不用清洗等特點。
FC-FJ8 plastic processing oil is suitable for stamping, punching, bending and mild drawing process of thin steel sheet, thin copper alloy plate and thin aluminum alloy plate. It has quick-drying, the less volatile components, without cleaning etc.
◆ FC-SF6000D適用于合金鋼、不銹鋼的冷鍛、沖壓工藝，也可用于螺釘、螺帽等的冷壓鍛造。該產品不含有氯系極壓劑，無不愉快氣味，易被操作工接受,CF6000D是CF6000的低粘度品。
FC-SF6000D is applied to cold forging and stamping process of alloy steel and stainless steel, can also be used for screws, nuts and other cold forging. This product does not contain chlorine extreme pressure agent, has not unpleasant odor and easy to be accepted by operators, CF6000D is a low viscosity product of CF6000.
◆ FC-SD1700適用于碳素鋼的深絞孔加工工藝，可沖孔厚達3-6mm的鋼板。該產品不含有氯系極壓劑，無不愉快氣味，易被操作工接受。
FC-SD1700 is applicable to deep reaming process of the carbon steel, can punch to 3-6mm thick steel plate. This product does not contain chlorine extreme pressure agent, has not unpleasant odor and easy to be accepted by operators.
◆ FC-FJ20塑性加工油適用于非鐵金屬沖壓、沖孔、撓曲、輕度拉深工藝。
FC-FJ20 plastic processing oil is suitable for stamping, punching, bending and mild drawing process of non-ferrous metals.
◆ FC-SF100塑性加工油適用于銅合金、鋁合金的沖壓、彎曲、拉深、鍛造工藝，也使用于碳素鋼、低合金鋼的擠壓加工等。
FC-SF100 plastic processing oil is suitable for stamping, bending, deep drawing and forging process of copper alloy, aluminum alloy, also used in extrusion processing of carbon steel and low alloy steel, and so on.
◆ FC-DC91W適用于不銹鋼成型加工，含有大量的油性劑和特殊添加劑，具有優良的潤滑性和冷卻性。該產品不含有氯，無不愉快氣味，易被操作工接受。
FC-DC91W is applicable to forming process of stainless steel, contains a lot of oily agent and special additive, it has excellent lubrication and cooling. This product does not contain chlorine, has not unpleasant odor and easy to be accepted by operators.
◆ FC-SF3300CH適用于小型螺釘、螺帽等的冷間鍛造加工。該產品含有硫、磷系極壓劑，潤滑性優良，無不愉快氣味，易被操作工接受。
FC-SF3300CH is suitable for cold forging process of small screws and nuts. This product contains sulfur and phosphorus based extreme pressure agent, has excellent lubricity, has not unpleasant odor and easy to be accepted by operators.
◆ FC-FJ30CH塑性加工油適用于非鐵金屬沖壓、沖孔、撓曲、輕度拉深工藝。
FC-FJ30CH plastic processing oil is suitable for stamping, punching, bending and mild drawing process of non-ferrous metals.
◆ FC-RC-1非水溶性軋制油適用于曲軸輥的輥面成型加工工藝。
FC-RC-1 non-water-soluble rolling oil is suitable for forming process of Crankshaft roller surface.
◆ FC-FJ71塑性加工油適用于燒結部品的矯正、矯形。
FC-FJ71 plastic processing oil is suitable for correction and orthopedic of sintering parts.
◆ FC-SF51塑性加工油適用于非鐵金屬沖壓、沖孔、撓曲、拉伸工藝。
FC-SF51 plastic processing oil is suitable for stamping, punching, bending and stretching process of non-ferrous metals.
◆ FC-SE205D塑性加工油適用于不銹鋼、炭素鋼、合金鋼的精密沖裁、拉深、拉延等加工。產品含有較多的極壓劑，潤滑性良好。
FC-SE205D plastic processing oil is suitable for precision punching and drawing process of stainless steel, carbon steel and alloy steel. The product contains more extreme pressure agent, has good lubrication.
◆ FC-FJ110為不含氯的塑性加工油，該產品適用于鋼管的矯正加工，也適用于鋼、鑄鐵的室內短期工序間防銹工藝，能在工件表面形成均勻、透明的軟質防銹膜，從而有效地防止銹蝕發生，同時FJ110塑性加工油還具有優良的工序間清洗作用。
FC-FJ110 is plastic processing oil without containing chlorine, the product is suitable for correct processing of steel, also applicable to anti rust technology of steel and cast between indoor short-term operation, can form uniform and transparent soft film on the surface of work piece, so as to effectively prevent rust, FJ110 plastic processing oil also has excellent inter-process cleaning action..
◆ FC-SF6120塑性加工油適用于碳素鋼、不銹鋼的重度沖壓、拉伸工藝。該產品具有優異的潤滑性，適用性很強。
FC-SF6120 plastic processing oil is suitable for heavy stamping and drawing process of carbon steel and stainless steel. The product has excellent lubricity and strong applicability.
◆ FC-SH7800塑性加工油適用于碳素鋼、鋁合金的深沖孔，碳素鋼的沖壓加工。該產品具有優良的潤滑性，適用性強。
FC-SH7800 plastic processing oil is suitable for deep punching of carbon steel and aluminum alloy, stamping process of carbon steel. The product has excellent lubricity and strong applicability.
◆ FC-FJ75塑性加工油是一款以油性劑為主的塑性加工油劑, 潤滑性能優異，且不含氯、硫、磷系等極壓劑。適用于鐵系燒結材料的精壓加工，以及鋼及其他非鐵金屬的沖壓加工。
FC-FJ75 plastic processing oil is plastic processing oil based on oily agent, it has excellent lubricating performance, and does not contain chlorine, sulfur, phosphorus and other extreme pressure agent. Applicable to the coining process of iron-based sintered material and stamping process of steel and other non-ferrous metals.